In the following 300V, volumestability particularly good

(300V is the start voltagecontaining air ionization). (300V is the start voltage containing airionization).

Within 2000 hours, the capacity loss is less than 1%; 2000 hours,less than 1% capacity loss;

More than 300V, volume stability isdepending on the above productiontechnology of 300V, volumestability is depending on the production technology

The production technology, goodstability, capacity will increase,production technology, will increase the capacity of stability

Can be used in high-voltage alternating current, each capacitorcan press

High voltage 2000VAC production,it must use impregnant high-voltage 2000VAC production, theuse of impregnant

, and increase the film thickness. ,and increase the film thickness

Because the metal surface is relatively weakly connected, so thecurrent

There are very limited. There arevery limited

High frequency can be used to 10MHz. Again, rolled foil is again high, rolled foil

Have effect on the big. Have effecton the big

Because of the metal electrode and the influence of the connecting end face, therefore have more

The inductance and resistance is large, so only use for low frequency(0.1MHz) inductance and resistance is large, so only use in the low frequency (0.1MHz)

Rated impulse is very high,because the end flange of the foil

Head is connected, so the pulse current head is connected, so by pulse large current

, to achieve 800V / μ s. , to achieve 800V / μ

Rated impulse low, due to sprayingface / metal electrode

Not firm, face more vulnerable. Not firm, face more vulnerable.Therefore, the pulse currentratings, therefore, pulse currentratings

Only the 20V / μ s. Only the 20V / μs. Because the thermal effect of pulse current will destroy the end due to thermal effects of pulse current can damage the e

Surface is connected, it mustconsider the pulse frequency.Surface is connected, it mustconsider the pulse frequency.